Supervisor - Realtime Values

The number of calls which are currently active in this ACD group, regardless of the Call Status.

The total number of the column “Current Calls” from all displayed data sets.

Pre Queue

All calls, which are in one of the following Call Status:

• Call Status 0 - Group Start
• Call Status 1 - Announcement 1
• Call Status 2 - Routing Application (only backwards compatibility)
• Call Status 3 - Announcement 2
• Call Status 9 - Tarif Prompt
• Call Status 10 - Call Recording Prompt

The total number in the column “Pre Queue” of all displayed data series.

In Queue

All calls, which are in one of the following Call Status:

• Call Status 4 - Queue
• Call Status 5 - Call Distribution, whereas agent hasn’t answered yet (dtAgentConnect not yet set)
• Call Status 8 - Queue (Prio) - Transfer in einer group from agent

The total number of the column “In Queue” of all displayed data series.

Service Level

If System Parameter ACD.Wallboard.ServiceLevelCalculation = 0

• With regard to the time difference between entry in the ACD Group and first successful connection with an agent, if it is minor than the set $SERVICE_LEVEL_SECONDS, the call is considered as “In Service”.
• All other calls are considered as “Not In Service”.
• The total number of calls “In Service” will be shown in percentage, in relation to the total number of calls.

If System Parameter ACD.Wallboard.ServiceLevelCalculation = 1

• With regard to the time difference between entry in the ACD Group and first successful connection with an agent, if it is minor than the set $SERVICE_LEVEL_SECONDS, the call is considered as “In Service”.
• All other calls are considered as “Not In Service”.
• The number of "In Service" Calls is shown in relation to the total number of calls:
  • which are in the ACD group
  • less the number of calls which are Pre Queue (Call Status 0, 1, 2, and 3)
  • less the number of calls which are in the queue, but shorter than $SHORT_HANGUP_SECONDS
• The result is shown as a percentage.

If System Parameter ACD.Wallboard.ServiceLevelCalculation = 0

• The sum of column “Calls in Service Level” for all displayed data sets, divided by the sum of the column “Current Calls” shown as percentage.

If System Parameter ACD.Wallboard.ServiceLevelCalculation = 1

• The sum of column “Calls in Service Level” for all displayed data sets, divided by:
  • the sum of the column “Current Calls”
  • less the sum of the column “Pre Queue”
  • less the sum of the column "In Queue", but only for calls in the queue for <= $SHORT_HANGUP_SECONDS.
• The result is shown as a percentage.

Availability

If service parameter ACD.Wallboard.ServiceLevelCalculation = 0

• A call is considered as “Agent Call” if it is connected with an agent in the current ACD group.
• The total number of “Agent Calls” will be shown in percentage, in relation to the total number of calls in the ACD group.

If System Parameter ACD.Wallboard.ServiceLevelCalculation = 1

• A call is considered as “Agent Call” if it is connected with an agent in the current ACD group.
• The number of calls will be put in relation to the number of calls:
• which are in the ACD group
• less the number of calls which are Pre Queue (Call Status 0, 1, 2, and 3)
• less the number of calls which are in the queue, but shorter than $SHORT_HANGUP_SECONDS
• The result is shown as a percentage.

If service parameter ACD.Wallboard.ServiceLevelCalculation = 0

• The sum of the column “Agent Calls” for all displayed data rows, divided by the sum of the column “Current Calls” shown as percentage.

If System Parameter ACD.Wallboard.ServiceLevelCalculation = 1

• The sum of column “Agent Calls” for all displayed data sets, divided by:
• the sum of the column “Current Calls”,
• less the sum of the column “Pre Queue”
• less the sum of the column "In Queue", but only for calls in the queue for <= $SHORT_HANGUP_SECONDS.
• The result is shown as a percentage.

Last-Agent %

The identification "Last-Agent Call" is assigned to a call if the Last-Agent algorithm successfully connected the caller with the last-agent.

The number of “Last Agent Calls” is shown in relation to the number of agent calls as percentage- so you can see which percentage of current agent calls were actually connected to the last-agent.

The sum of the column “Last-Agent Calls” for all displayed data sets, divided by the sum of the column “Agent Calls”, shown as percentage.

Agent Calls

A call is considered as Agent Call if it is connected to an agent in the current ACD Group.

The sum of column “Agent Calls” for all displayed data sets.

Agent Calls (↑)

If a call is distributed to an agent with an upward skill correction, the call is calculated in this column.

The sum of the column “Agent Calls” for all displayed data sets.

Agent Calls (•)

If a call is distributed to an agent without skill correction the call is calculated in this column.

The sum of the column “Agent Calls” for all displayed data sets.

Agent Calls (↓)

If a call is distributed to an agent with a downward skill correction, the call is calculated in this column.

The sum of the column “Agent Calls” for all displayed data sets.

Calls in Service Level

If service parameter ACD.Wallboard.ServiceLevelCalculation = 0

• With regard to the time difference between entry in the ACD Group and first successful connection with an agent, if it is minor than the set $SERVICE_LEVEL_SECONDS, the call is considered as “In Service”.
• All other calls are considered as “Not In Service”.
• The number of "In Service" Calls is shown as a number.

If System Parameter ACD.Wallboard.ServiceLevelCalculation = 1

• With regard to the time difference between entry in the ACD Group and first successful connection with an agent, if it is minor than the set $SERVICE_LEVEL_SECONDS, the call is considered as “In Service”.
• All other calls are considered as “Not In Service”.
• The number of "In Service" Calls is shown as a number.

Sum of the column “Calls in Service Level” for all displayed data sets.

Last-Agent Calls

• The identification "Last-Agent Call" is assigned to a call if the Last-Agent algorithm successfully connected the caller with the last-agent.
• The number of “Last Agent Calls” is shown.

The sum of the column “Last-Agent Calls” for all displayed data sets.

Ø Waiting Time

• If the call is connected to an agent, the time between the first group entry and the first connection to an agent is measured as waiting time.
• If the call is channeled out of the queue, for such purposes as recording a voice mail, the time between the first group entry and the execution of the rule is measured.
• Otherwise the time between the entry to the first ACD group and the current time is measured.
• This time corresponds to the waiting time of the caller since the enty into the first ACD Group.
• This number is divided by the number of current calls and displayed as average time.

The sum of waiting times per call divided by the sum of the column “current Calls”

Max. Waiting Time

This value is the maximum of all waiting times which are used for the calculation of the average “Ø Waiting Time”.

The maximum value of the column “max. Waiting Time”.

Ø Queue Time

• For all calls which are currently in the ACD queue.
• If the call is connected to an agent, the time between the first ACD queue entry and the first connection to an agent is measured as queue time.
• Otherwise the time between the entry to the first ACD queue and the current time is measured.
• This time corresponds to the queue time of the caller since the enty into the first ACD Group.
• This number is divided by the number of current calls and displayed as average time.

The sum of the queue times per call, divided by the sum of the column “In Queue”.

Max. Ø Queue Time

For all calls which are currently in the ACD queue. This value is the maximum of all queue times used for the calculation of the average “Ø Queue Time”.

The maximum value of the column “max. Queue Time”.

PostCall Duration Ø

The calculation is based on the following formula: Total Post Call time / number of calls answered that Post Call had.

The average of the post call duration average among all the groups

Logged In

• For agents in a status which is not labelled “Logged-In”, 0 is calculated.
• For agents in a status which is labelled “Logged-In”:
  • 1 is calculated, if the agent is a normal agent or
  • the number of channels if the agent is a multichannel agent.
• These values are output added together.

• The number of agents logged in to the system who are members of one of the displayed ACD groups.
• Here the agents will be calculated only once, regardless of the number of ACD groups they are logged in, or if they are logged in to the displayed ACD groups. Only the login status of the ACD is of importance.

That means this number does not necessarily have to correspond to the sum of the overlying numbers.

Free.

Agents, who:

• are logged out of the ACD group,
• are logged in to a status in which no calls can be proceeded (calls= 0 for Agent Status)
• are busy
• have to register a transaction code for the last call,
• are in pause or
• busy in a post call, 0.

are not calculated here. Otherwise:

• 1 is calculated, if the agent is a normal agent
• The number of channels if the agent is a multichannel agent.

These values are output added together.

• Die number of free agents (logged-in as agents, regardless of the ACD groups, phone is free, no registration constraint of transaction codes active, no post call)
• For Multi Channel Agents the number of the configured channels is calculated.
• Here the agents will be calculated only once, regardless of the number of ACD groups they are logged in.

That means this number does not necessarily have to correspond to the sum of the overlying numbers.

Long calls

• A call is considered a “Long Call” if it exceeds the “Long Call” period configured for the ACD group. Here a “Long Call” is indicated once and continues to be labelled as such throughout the total duration of the call.
• Agents who are logged out of the ACD group are not calculated here. Otherwise:
  • for a Multichannel-Agent the number of channels busy with “Long Calls” are calculated or
  • 1 is calculated, for normal agents busy in “Long Calls”.
• This column contains the overall number of such “Long Calls”.

• The number of Agents who are busy in a call which was labelled as “Long call”.
• That means this number corresponds to the sum of the overlying numbers.

Post Call

• This column contains the number of agents who are busy in automatic or manual post calls or who still have to register a transaction code (registration constraint).
• Agents who are logged out of the ACD group are not calculated here.
• For Multi Channel Agents the number of the configured channels is calculated.

• The number of agents currently in post call (manual or automatic) or who are busy with a transaction code registration constraint.
• Here the agents will be calculated only once, regardless of the number of ACD groups they are logged in.

That means this number does not necessarily have to correspond to the sum of the overlying numbers.

Pause

• For logged out agents or agents not in pause, 0
• Otherwise for normal agents 1, for multichannel agents the number of configured channels.
• These values are output added together.

• The number of agents currently on a break.
• Here the agents will be calculated only once, regardless of the number of ACD groups they are logged in.

That means this number does not necessarily have to correspond to the sum of the overlying numbers.

Busy

• For logged in agents 0.
• For agents, who missed one or more calls in this ACD group due to a busy phone, 1 is calculated.
• Otherwise 0 is calculated.
• These values are output added together.

• The number of agents who were busy the last time a call was offered to them.
• Here the agents will be calculated only once, regardless of the number of ACD groups they are logged in.

That means this number does not necessarily have to correspond to the sum of the overlying numbers.

No Answer

• For logged in agents 0.
• For agents, who missed one or more calls in this ACD group due to no answer, 1 is calculated.
• Otherwise 0 is calculated.
• These values are output added together.

• The number of agents who were busy the last time a call was offered to them.
• Here the agents will be calculated only once, regardless of the number of ACD groups they are logged in.

That means this number does not necessarily have to correspond to the sum of the overlying numbers.

Ø Calls

• For logged-in agents: the number of calls for this ACD group since the login to the group.
• For logged-out agents: 0.
• These numbers are summed up and devided by the number of logged-in agents.
• Thus, the average number of calls per agent since the log-in arises (regardless of when it occured)

• The average number of calls since the agent login to the system determined on all unambiguous agents who a members of the ACD group.
• Here the agents are only counted once, however all calls the agent conducted are counted.

That means that this figure is not related to the overlying figures for every single ACD group

Ø Occupancy

• In this calculation only logged in agents are considered.
• This percentage indicates, in relation to the login time in the corresponding ACD group, which percentage of the login time the agent was busy with calls in the ACD group.
• The telephony time is calculated without Voice Prompt.

• The overall average occupancy of the agents. Here the total times for login and call duration of the agents are summed up and indicated as percentage.
• Here the agents are only counted once, however all calls the agent conducted are counted.

That means that this figure is not related to the overlying figures for every single ACD group

Total

• This column indicates the overall number of configured agents for this ACD group
• For multichannel agents the number of configured channels is counted, for normal agents 1.

• The overall number of unambiguous agents who are members in all displayed ACD groups.
• Here the agents will be calculated only once, regardless of the number of ACD groups they are logged in.

That means this number does not necessarily have to correspond to the sum of the overlying numbers.