Versions Windows prises en chargeVersion | Supporté | Nouvelles installations | Recommandation |
---|
Serveur Windows 2008 | Non | Non | Migrer vers Serveur Windows 2016 ou 2019. | Windows Server 2008 R2 | Non | Non | Migrer vers Serveur Windows 2016 ou 2019. | Serveur Windows 2012 | Non | Non | Migrer vers Serveur Windows 2016 ou 2019. | Serveur Windows 2012 R2 | Oui | Non | Migrer vers Serveur Windows 2016 ou 2019. | Serveur Windows 2016 | Oui | Oui |
| Serveur Windows 2019 | Oui | Oui |
|
PréparationSecure BootPour l'installation des pilotes SIP sur Windows Server 2016 et Windows Server 2019, Secure Boot doit être désactivé. Pour savoir comment procéder, consultez la documentation relative à votre environnement virtuel. Serveur proxyCertaines applications (git par exemple) nécessitent la configuration explicite d'un proxy, car elles ne lisent pas les paramètres du proxy de Windows. Le serveur proxy peut être identifié comme suit : Translations Ignore |
---|
Code Block |
---|
netsh winhttp show proxy |
|
Installation de base du système d'exploitationInstallez le système d'exploitation de base à partir du fichier ISO. Info |
---|
Note : installez la version avec l'interface graphique complète. |
Conditions de Handover pour l'installationLes tâches suivantes doivent être accomplies : - Configuration du réseau (adresse IP, masque de réseau, passerelle, DNS)
- NOTE : assurez-vous que l'adresse est soit statique, soit réservée dans le DHCP
- Nom d'hôte et domaine ou groupe de travail configurés
- Compte de l'administrateur local
- Bureau à distance activé
- Outils d'invité de l'hyperviseur installés (Hyper-V Tools ou VMWare Tools, ou autre)
- La machine a accès à Internet pour télécharger le logiciel requis.
Mises à jour Windows Warning |
---|
Assurez-vous que toutes les mises à jour de Windows sont installées. Une fois que c'est fait, il est recommandé de désactiver les mises à jour de Windows et de les exécuter manuellement si nécessaire. Avant d'exécuter des mises à jour Windows sur une machine de production, vous devez toujours vous assurer d'avoir une sauvegarde complète ou un instantané de la machine. Les mises à jour de Windows ont, dans le passé, cassé des systèmes fonctionnant parfaitement. Le nombre de correctifs récupérés lors d'une mise à jour typique rend presque impossible la recherche du paquet incriminé dans une installation défectueuse. VOUS AVEZ ÉTÉ PRÉVENU ! |
À ne pas faireLes points suivants sont des non-non, ne PAS faire ça: - Des antivirus en temps réel mal comportés sont installés
- Le serveur jtel est un système de communication en temps réel, des scanners de virus qui ont un impact sur l'accès en temps réel aux fichiers sur le système de fichiers ou le réseau sont à éviter.
- Bien que nous ne puissions pas recommander un antivirus commercial particulier, le défenseur de fenêtres prêt à l'emploi peut être utilisé.
- Mises à jour automatiques de Windows activées
- Ne faites pas cela. Voir l'avertissement ci-dessus.
- Mises à jour automatiques du Windows Defender via la politique de groupe dans le domaine activée
- L'utilisation de Windows Defender est autorisée - voir ci-dessus.
- Cependant, assurez-vous que la politique de groupe de domaines ne tire PAS sur les mises à jour de Windows Defender pendant les heures d'ouverture du centre d'appel.
- Politique de groupe - Déconnexion automatique activée
- Désactivez ceci. L'utilisateur qui exécute le logiciel jtel ne doit PAS être déconnecté lorsque le système fonctionne.
- Contrôle du compte d'utilisateur activé
- Eteignez-le !
- Si elle est activée (forcée) par la politique de groupe, alors faites une exception pour cette machine.
À faire- Politique de groupe - Exécuter les demandes en tant que service
- Le compte sur lequel tourne le logiciel jtel DOIT être autorisé à exécuter des applications en tant que service.
- Installation des logiciels
- Le compte qui exécute le logiciel jtel DOIT être autorisé à installer des logiciels et à effectuer des mises à jour de logiciels.
- Pare-feu Windows
Info |
---|
Si jtel ou un partenaire certifié effectue l'installation pour vous, c'est le moment où vous devez remettre le système. |
Installation des logicielsTéléchargement de logicielsLes fichiers suivants sont téléchargés pour installer le logiciel : Translations Ignore |
---|
Code Block |
---|
https://cdn.jtel.de/downloads/browser/ChromeStandaloneSetup64.exe https://cdn.jtel.de/downloads/java/openjdk-12.0.2_windows-x64_bin.zip https://cdn.jtel.de/downloads/redist/vcredist_9.0_x86_9.0.30729.4148.exe https://cdn.jtel.de/downloads/redist/vcredist_2010_x86_10.0.30319.exe https://cdn.jtel.de/downloads/redist/vcredist_2012_x64_11.0.61030.exe https://cdn.jtel.de/downloads/redist/vcredist_2012_x86_11.0.61030.exe https://cdn.jtel.de/downloads/redist/vcredist_2015_x64_14.0.24123.exe https://cdn.jtel.de/downloads/redist/vcredist_2015_x86_14.0.24123.exe https://cdn.jtel.de/downloads/redist/vcredist_2017_x64_14.16.27027.exe https://cdn.jtel.de/downloads/redist/vcredist_2017_x86_14.16.27027.exe https://cdn.jtel.de/downloads/redist/vcredist_2019_x64.14.28.29914 https://cdn.jtel.de/downloads/redist/vcredist_2019_x86.14.28.29914.exe https://cdn.jtel.de/downloads/redist/ww_icl_redist_ia32_2017.1.143.msi https://cdn.jtel.de/downloads/redist/ww_icl_redist_intel64_2017.1.143.msi https://www.cygwin.com/setup-x86_64.exe https://cdn.jtel.de/downloads/tools/Git-2.27.0-64-bit.exe https://cdn.jtel.de/downloads/tools/TortoiseGit-2.10.0.2-64bit.msi https://cdn.jtel.de/downloads/tools/npp.7.8.6.Installer.exe https://cdn.jtel.de/downloads/tools/mysql-connector-odbc-5.2.7-win32.msi https://cdn.jtel.de/downloads/NTP/ntp-4.2.8p14-win32-setup.exe https://cdn.jtel.de/downloads/NTP/ntp-time-server-monitor-104.exe |
|
Cela peut être réalisé en utilisant les commandes suivantes (il suffit de les coller dans une ligne de commande ouverte) : Translations Ignore |
---|
Code Block |
---|
https://cdn.jtel.de/downloads/browser/ChromeStandaloneSetup64.exe https://cdn.jtel.de/downloads/java/openjdk-12.0.2_windows-x64_bin.zip https://cdn.jtel.de/downloads/redist/vcredist_9.0_x86_9.0.30729.4148.exe https://cdn.jtel.de/downloads/redist/vcredist_2010_x86_10.0.30319.exe https://cdn.jtel.de/downloads/redist/vcredist_2012_x64_11.0.61030.exe https://cdn.jtel.de/downloads/redist/vcredist_2012_x86_11.0.61030.exe https://cdn.jtel.de/downloads/redist/vcredist_2015_x64_14.0.24123.exe https://cdn.jtel.de/downloads/redist/vcredist_2015_x86_14.0.24123.exe https://cdn.jtel.de/downloads/redist/vcredist_2017_x64_14.16.27027.exe https://cdn.jtel.de/downloads/redist/vcredist_2017_x86_14.16.27027.exe https://cdn.jtel.de/downloads/redist/vcredist_2019_x64.14.28.29914 https://cdn.jtel.de/downloads/redist/vcredist_2019_x86.14.28.29914.exe https://cdn.jtel.de/downloads/redist/ww_icl_redist_ia32_2017.1.143.msi https://cdn.jtel.de/downloads/redist/ww_icl_redist_intel64_2017.1.143.msi https://www.cygwin.com/setup-x86_64.exe https://cdn.jtel.de/downloads/tools/Git-2.27.0-64-bit.exe https://cdn.jtel.de/downloads/tools/TortoiseGit-2.10.0.2-64bit.msi https://cdn.jtel.de/downloads/tools/npp.7.8.6.Installer.exe https://cdn.jtel.de/downloads/tools/mysql-connector-odbc-5.2.7-win32.msi https://cdn.jtel.de/downloads/NTP/ntp-4.2.8p14-win32-setup.exe https://cdn.jtel.de/downloads/NTP/ntp-time-server-monitor-104.exe |
|
Info |
---|
| Remarque - si les paramètres du proxy sur la machine sont incorrects - par exemple un proxy global est présent par la politique de domaine qui ne doit pas être utilisé, alors les commandes powershell doivent être modifiées en ajoutant le -ProxyUsage NoProxy : Code Block |
---|
powershell -command "& { Start-BitsTransfer -ProxyUsage NoProxy -Source https://cdn.jtel.de/downloads/browser/ChromeStandaloneSetup64.exe -Destination $Env:UserProfile\Downloads }" |
|
InstallationCe qui suit vous montre comment installer le logiciel en silence à partir de la ligne de commande. Vous pouvez également installer manuellement chaque téléchargement à partir du dossier des téléchargements. Installer un navigateur décentLe serveur Windows est toujours livré avec Internet Explorer activé et aucun bon navigateur n'est installé. La première tâche consiste à régler ce problème. Nous recommandons d'utiliser chrome (si vous avez téléchargé comme ci-dessus, ce sera l'installateur autonome dans ChromeStandaloneSetup64.exe), mais si vous préférez firefox ou edge, c'est tout à fait possible aussi. Translations Ignore |
---|
Code Block |
---|
powershell -command "& { start-process -FilePath $Env:UserProfile\Downloads\ChromeStandaloneSetup64.exe -ArgumentList '/silent /install' -Verb RunAs -wait }" |
|
Configurez le navigateur par défaut. Redistributions de Visual Studio et du compilateur IntelLes redistribuables pour plusieurs variantes de compilateurs doivent être installés. Ceci peut être réalisé silencieusement en utilisant les commandes suivantes : Translations Ignore |
---|
Code Block |
---|
powershell -command "& { start-process -FilePath $Env:UserProfile\Downloads\vcredist_9.0_x86_9.0.30729.4148.exe -ArgumentList '/qb!' -Verb RunAs -wait }" powershell -command "& { start-process -FilePath $Env:UserProfile\Downloads\vcredist_2010_x86_10.0.30319.exe -ArgumentList '/passive /norestart' -Verb RunAs -wait }" powershell -command "& { start-process -FilePath $Env:UserProfile\Downloads\vcredist_2012_x64_11.0.61030.exe -ArgumentList '/passive /norestart' -Verb RunAs -wait }" powershell -command "& { start-process -FilePath $Env:UserProfile\Downloads\vcredist_2012_x86_11.0.61030.exe -ArgumentList '/passive /norestart' -Verb RunAs -wait }" powershell -command "& { start-process -FilePath $Env:UserProfile\Downloads\vcredist_2015_x64_14.0.24123.exe -ArgumentList '/install /passive /norestart' -Verb RunAs -wait }" powershell -command "& { start-process -FilePath $Env:UserProfile\Downloads\vcredist_2015_x86_14.0.24123.exe -ArgumentList '/install /passive /norestart' -Verb RunAs -wait }" powershell -command "& { start-process -FilePath $Env:UserProfile\Downloads\vcredist_2017_x64_14.16.27027.exe -ArgumentList '/install /passive /norestart' -Verb RunAs -wait }" powershell -command "& { start-process -FilePath $Env:UserProfile\Downloads\vcredist_2017_x86_14.16.27027.exe -ArgumentList '/install /passive /norestart' -Verb RunAs -wait }" powershell -command "& { start-process -FilePath $Env:UserProfile\Downloads\vcredist_2019_x64.14.28.29914.exe -ArgumentList '/install /passive /norestart' -Verb RunAs -wait }" powershell -command "& { start-process -FilePath $Env:UserProfile\Downloads\vcredist_2019_x86.14.28.29914.exe -ArgumentList '/install /passive /norestart' -Verb RunAs -wait }" powershell -command "& { start-process -FilePath msiexec.exe -ArgumentList \"/i $Env:UserProfile\Downloads\ww_icl_redist_ia32_2017.1.143.msi /quiet /norestart\" -Verb RunAs -wait }" powershell -command "& { start-process -FilePath msiexec.exe -ArgumentList \"/i $Env:UserProfile\Downloads\ww_icl_redist_intel64_2017.1.143.msi /quiet /norestart\" -Verb RunAs -wait }" |
|
JavaJava 12.x doit être déplacé dans le dossier approprié. Cette rangée d'entrées le déplacera au bon endroit: Translations Ignore |
---|
- Créez le dossier "Apps" sous "C:\".
- Aller aux téléchargements
- Déplacez "openjdk-12.0.2_windows-x64_bin.zip" de "Downloads" vers "C:\Apps".
- Déballez "openjdk-12.0.2_windows-x64_bin.zip"
- Supprimer les fichiers .zip
|
CygwinVous pouvez installer cygwin silencieusement comme suit (passé dans une fenêtre cmd ouverte): Translations Ignore |
---|
Code Block |
---|
mkdir c:\cygwin mkdir c:\cygwin\packages "%USERPROFILE%\Downloads\setup-x86_64.exe" ^ --site http://ftp-stud.hs-esslingen.de/pub/Mirrors/sources.redhat.com/cygwin/ ^ --no-shortcuts ^ --no-desktop ^ --quiet-mode ^ --root "c:\cygwin" ^ --arch x86_64 ^ --local-package-dir "c:\cygwin\packages" ^ --verbose ^ --prune-install ^ --packages openssh,ncftp,wget,curl,lftp |
|
Remarque, cela affichera ce qui suit: Translations Ignore |
---|
Code Block |
---|
note: Hand installation over to elevated child process. |
|
Attendez simplement que le programme d'installation disparaisse, puis appuyez sur Entrée. Si vous installez manuellement, assurez-vous d'installer les packages suivants: Notepad++Vous pouvez installer notepad ++ en mode silencieux avec la commande suivante: Translations Ignore |
---|
Code Block |
---|
powershell -command "& { start-process -FilePath $Env:UserProfile\Downloads\npp.7.8.6.Installer.exe -ArgumentList '/S /D=$Env:ProgramFiles(x86)\Notepad++\' -Verb RunAs -wait }" |
|
Pilotes MySQLVous pouvez installer les pilotes mysql en silence avec la commande suivante: Translations Ignore |
---|
Code Block |
---|
powershell -command "& { start-process -FilePath msiexec.exe -ArgumentList \"/i $Env:UserProfile\Downloads\mysql-connector-odbc-5.2.7-win32.msi /quiet /norestart\" -Verb RunAs -wait }" |
|
GIT et Tortoise GITActuellement, nous n'avons aucune installation silencieuse disponible pour ces packages, ils sont installés à l'aide des programmes d'installation normaux. Warning |
---|
Lors de l'installation de GIT, n'installez pas le gestionnaire d'informations d'identification GIT. |
Info |
---|
Lors de l'installation de Tortoise GIT, configurez le nom d'utilisateur et l'email comme suit: assistance jtel support@jtel.de |
Synchronisation de l'heureWindows est notoirement mauvais pour garder le temps. C'est pourquoi nous recommandons l'installation d'un service de temps alternatif. Meinberg fournit un service de temps NTP gratuit. Pour plus de détails, voir ici : https://www.meinbergglobal.com/english/sw/ntp.htm Il y a aussi beaucoup d'informations intéressantes sur leur site Web sur NTP. InstallationInstallez à la fois le service de temps en utilisant ntp-4.2.8p14-win32-setup.exe et le moniteur utilisant ntp-time-server-monitor-104.exe Indiquez une source de temps bien connue et fiable. Par exemple, vous pouvez utiliser les serveurs de temps suivants : Translations Ignore |
---|
Code Block |
---|
ptbtime1.ptb.de,ptbtime2.ptb.de,ptbtime3.ptb.de |
|
Outre la spécification des serveurs de temps, vous pouvez laisser toutes les autres options par défaut. Note |
---|
Les contrôleurs de domaine Windows n'entrent pas dans la catégorie des sources de temps fiables. Quoi que vous décidiez d'utiliser, assurez-vous simplement que TOUTES les machines de votre installation conservent la même heure et utilisent la même source. Il vaut mieux que toutes les machines soient fausses par le même décalage, que certaines bonnes et d'autres mauvaises. |
Paramètres OSWindows ExplorerCes paramètres sont facultatifs, mais recommandés: - Afficher tous les dossiers
- Afficher les extensions de nom de fichier
CMD Warning |
---|
Ce paramètre est obligatoire: Ouvrez une fenêtre cmd, faites un clic droit sur l'icône en haut à gauche et choisissez Par défaut: - Désactiver le mode d'édition rapide
|
Fichier d'hôtesPour que la machine puisse résoudre les alias utilisés pour accéder aux autres machines sans reconfiguration, il est nécessaire d'éditer le fichier hosts. Voir ici pour plus de détails: Hosts File - All OS (CentOS8/Win2019).
|