Introduction

A dynamic priority group is a container which references:

Targets
- The number of planned calls for a time slice associated with the dynamic priority group
One or more ACD groups
- All of the agents logged into the associated groups are considered when the KPIs for the wallboard are calculated
Static configuration values
- The static configuration values can be used when the dynamic priority group is switched off

Service numbers reference the dynamic priority group:

All associated service numbers are considered when the KPIs are calculated for the dynamic priority group.

Operation

Activation

In the supervisor, tab Dynamic Priority Groups, the following is shown:

The green circles shown from left to right denote the following:

Dynamic priority group "BigShoes" is active
Static priority 50 overrides service number priority is active
The dynamic priority planned calls entry for 20.11.2020 from 00:00 to 23:59 of 100 calls is active

Clicking on the green circle will toggle the activation / deactivation of these entries.

Dynamic Mode

Dynamic mode is when the dynamic priority group is activated in the supervisor and calls are planned for the current timeslice. Also the planned calls entry must be active.

For example:

If all three of these criteria are met, the algorithm works as follows:

( Remaining Time in Timeslice > 0 ) AND ( Planned Calls > Serviced Calls in Timeslice ) --> Priority = dynamic
( Serviced Calls in Timeslice >= Planned Calls ) --> Priority = 0

The formula for calculating the dynamic priority is as follows:

DeltaCallsPercent = ( PlannedCalls - ServicedCalls ) * 100.0 / PlannedCalls;
DeltaTimePercent = SecondsToGoInTimeslice * 100.0 / SecondsTotalInTimeslice;
DynamicPriorityGroupsPriority = MINIMUM OF ( ( DeltaCallsPercent * 50 / DeltaTimePercent ), 100 );