Supervisor view shows User Profile of Agent who is no longer configured in the user profile
Steps to reproduce:
- Add an agent to a User Profile - Activate this user profile on the user account - this is shown in the supervisor - Delete the user from the user profile - The user profile is still shown in the supervisor view.
Voice mail events could not be created if a quote was present in the email body or subject
If the email body or subject, which is configureable as long text, contains a simple quote, the voicemail event is not created by the server. This problem has been fixed.
Teams integration - downloading files from the jtel application in Microsoft Teams fails
Downloading files from the web portal normally results in opening a new tab in the browser before proceeding. However, this procedure may lead to some issues whenever the user attempts to download files from the jtel application in microsoft teams.
This has been fixed and downloaded files will appear now in the same tab/application.
The change was made in the following places: - CSV file export - Waves - Voice mails - Routing applications - Fax documents - Call recordings - Conferences - Skins - Acd mappings - Dialler contacts - TTS Exception Lexica
A more selective index is now used when ACD events are distributed. This increases performance on systems with a large number of events (tens of thousands of events).
ACD-A-013 - ACD Statistics Agent Calls- records calls as "error" if the caller hangs up with cause 31 (normal unspecified)
If the caller hangs up before the call is connected to the agent, and cause 31 (normal unspecified) is reported, the report ACD-A-013 - ACD Statistics Agent Calls counts the call as an error. This problem has been fixed and this type of call is conisedered now as "Caller Hangup".
Chat with Whatsapp - Server not available because of logfile growth reaching storage capacity
After 24h of non-activity, the whatsapp session expires. This expiration can trigger a bug in the chatserver and an extreme growth in the logfile to reach the maximum storage capacity of the chat server. This problem has been fixed.
Supervisor Aggregation Groups - inconsistent operation across more than one tenant
Aggregation groups created under ACD - Aggregation Groups. would be displayed in the Supervisor - Inbound Status table and Supervisor Wallboard table for all tenants. This problem has been fixed - each tenant can only see their aggregation groups.
The report "ACD Agent Calls Report 2 - itemised agent calls by service number" has incorrect entries when selecting the period option "From/To".
The report "ACD Agent Calls Report 2 - itemised agent calls by service number" under Statistics shows incorrect "From Date" and "To Date" when selecting the period option "From/To". This problem has been fixed.
Filter Counter in Agent Home - Agent and Team Views - could be incorrect
The total number of records counter in the filter in Agent Home for the Agent, Team and category views - could be incorrect. This problem has been fixed.
Click to Hear Voice-Mail set Calling Party Number to Random A-Number
When using the click to hear function, the outbound call would be made on a potentially non associated service number. The trunk selected would be OK, but the signalled A-Party number was sometimes not. This problem has been fixed.
Security Groups - The Workflow Application Types and Workflow Objects tabs.
The Workflow Application Types and Workflow Objects tabs used within the security groups were intended to be visible to the reseller and the system administrator, and invisible to the client administrator and the user. This problem has been fixed.
Statistics and Service Number for Voicemail and Callbacks Missing - Configuration and Agent Group Issue
When a voicemail or callback event was received in an agent / configuration group scenario, the callback from the voice mail or callback event would not record statistics correctly. Also, the service number selection would cause error messages to appear in the telephony server even though the call was correctly setup. This problem has been fixed.
Service Numbers - Service Number is displayed instead of Name when adding new service number to user
When adding service numbers to users, the service number was displayed in the Name column instead of the name of the service number. This has been changed so that the assigned name is now displayed.
Call Transfer - Bug in Logic when a call is held and transfer is made to a number that does not exist.
A bug was found when transferring a call to an external number which is not valid/does not exist. The announcements configured in the Acd Group were not executed correctly. This has been fixed.
Security Groups - Reports added manually by a reseller displayed directly
When a reseller add a report to a client, it would be shown directly under Statistics Reports before adding the report to the relevant security group or user. This problem has been fixed.
Trunk Groups - VOIP - Number Translator - Add prefix "sip:+", then E.164 number and postfix "@<ip>[:<port>]" - anonymous number signalling problem
When using the number translator VOIP - Number Translator - Add prefix "sip:+", then E.164 number and postfix "@<ip>[:<port>]" - anonymous numbers were incorrectly sent as "+". This problem has been fixed.
Supervisor Monitoring - Mute / Non Mute Monitoring always Non Mute
When monitoring a call, the web application showed the unmute button by default even when the supervisor should have been muted. Actually, the supervisor was always unmuted. This problem has been fixed.
MiniClient with .EXE - No reconnect to webserver after webserver is restarted
The miniclient does not reconnect with the webserver when it is restarted. Instead, the same screen "freezes" and the agent does not know that a disconnect with the webserver has happened in the background. This has been fixed, the mini client now automatically reconnects to the web server.
When editing the Tab "Resources" in clients configuration as reseller administrator to remove resources from the clients view, some would not be removed properly. This has been fixed.
Monitoring Innovaphone PBX Connector with Windows Task Scheduler
Scripts are provided provided to monitor the status of the Innovaphone PBX Connector on two telephony servers. These scripts start and stop the connector as required only on one of the servers (to prevent "double" monitoring events). The scripts are provided in the innovaphone installation directory: JTELInnovaphonePBXTaskMonitor_acd-tel1.cmd, JTELInnovaphonePBXTaskMonitor_acd-tel2.cmd. Note: These scripts can only be used on redundant systems.
A new object "Wait" has been added to the IVR. This performs a simple sleep operation. This can, for example, be used to allow a ring tone to be heard for a certain number of seconds before proceeding in the application.
IVR - Refuse Calls does not record statistics correctly
The IVR did not record statistics correctly for calls which were refused before any event (ringing or connect) had been sent. This problem has been fixed. Note: this requires an update of the telephony server to version 5.23.18 or later.
A new IVR Object "Ringing" has been added. This allows you to explicitly send 180 RINGING (alerting) to the far end from the IVR. Note: ringing and offhook are still sent implicitly by certain functions such as the ACD (when entered - ringing) and when announcements are played (offhook).
IVR Signalling Parameter (ACD objects) - now supports variables
The signalling parameter in the ACD objects in the IVR now supports variables. Previously, it was only possible to use a fixed value (usually a telephone number in E.164 format). Note: in releases 3.25 and 3.26 this will result in an error being shown in the GUI. It however does not affect the functionality. From release 3.27 the error message in the GUI is removed (open and close the objects in question to remove the error).
Call Flow - new REST GET functions available at various points in the call flow
The following parameters can be added to an ACD Group which causes the server to send http GET requests (REST calls) to a configured URL when events occur in the call flow to agents.
RINGING <-- sent when the call is in the ringing state CONNECTED <-- sent when the call is connected CONNRES.1 <-- sent when the call was successful and is ended CONNRES.2 <-- sent when the call was not answered CONNRES.3 <-- sent on outbound calls only when the destination is busy CONNRES.4 <-- sent when the caller hangs up during the call to an agent (inbound calls only) CONNRES.6 <-- sent when the called agent refused the call or hungup during a whisper transfer announcement
Note, the use cases CONNRES.3 (Busy on an inbound call) and CONNRES.5 (SIP Reason) and CONNRES.7 (Error) are not necessary, since a RINGING event must always be received before any REST calls are made.
The value of the parameter is specified as a multi-line value instructing the server what to do. The following lines are allowed:
URL=<url> <- Specifies a URL to be called METHOD=GET/POST <- Specifies the http method to use TIMEOUT=<ms> <- Specifies a timeout in ms before the function is aborted. HEADER=<http_header> <- Specifies an http header to be used. May be specified multiple times. QUERYPARAM=<param=value> <- Specifies a query parameter which will be added to the URL in URL encoded format DATA=<value> <- Specifies POST data which will be sent with the request
The following variables may be used in the parameter value:
$date_time <- the current date and time $service_number <- the ServiceNumbers.Name field $service_name <- the ServiceNumbers.Name2 field $caller <- the caller ID $agent_name <- The surname of the agent $agent_firstname <- The firstname of the agent $agent_number <- The number of the agent $agent_id <- The ID of the agent $agent_tel <- The telephone number of the agent $agent_uid <- The UID of the agent $agent_nickname <- The NickName of the agent $group_name <- The name of the ACD group $group_number <- The number of the ACD group $diallercampaign_name <- The name of the dialler campaign $diallercontact_name <- The surname of the dialler contact $diallercontact_firstname <- The firstname of the dialler contact $diallercontact_externalsystemlink <- The external system link for the dialler contact $diallercontact_userdata <- The UserData field for the dialler contact
Examples:
This will send a GET request when a direct inbound ACD call is ringing:
A new tab "Parameters" has been added to ACD groups. This feature will be used to enable implementation of various features and settings without having to replace / update the web application.
ACD Call Transfer - Outbound Signalling Parameter in P-Asserted / P-Preferred Identity
The Signalling parameter used to override the A-Party number on call transfer to external destinations now supports overriding the P-Asserted-Identity and P-Preferred-Identity parameters.
IVR Start Object - causes GOSUB to lose parameters
The Start object was initiating the service number parameters every time it was called. This may cause problems when a GOSUB was used in the routing application and an (existing) service number parameter was assigned to before the GOSUB - the parameter may be overwritten by the GOSUB call. Now, the service number parameters are only initialised the first time the Start object is called during a routing application / call.
User Categories and their contents (the agent list) were displayed incorrectly in agent home - newly created or deleted categories were not immediately visible. This problem has been fixed. In addition, the categories are now displayed in alphabetical order.
Service Numbers Report 2 (Inbound ACD) - ACD-S-002 - errors in some columns
ACD-S-002 - the records in columns "Answered in Service Calls", "Answered not in Service Calls", "Lost Calls", "Quote Lost Calls" and "Service Level" were not correct depending on the time interval and the granularity chosen. This problem has been fixed.
Teams Connector - MS Graph API does not support querying presence of more than 650 users
The MS Graph API does not support querying presence of more than 650 users. This problem has been fixed by querying multiple times for larger tenants. Also a useful piece of information for configuration: If the password or key for the tenant include the & character, it must be replaced with %26 in the XML configuration file.
SalesForce - Lightning Support now Pops up Softphone in SalesForce when a call is received
In Salesforce, the lightning support module now pops up the softphone in addition to any Salesforce record found or screen popped, when a call notification is received.
The SalesForce getCallerInformation object has been extended to include two new parameters to the REST query to the SalesForce instance.
The first new parameter queryType allows the user to specify a particular type of query to perform in the SalesForce instance. This could, for example, be used to query for tickets, or other data in the SalesForce instance.
The further parameters UserData, UserData2 and UserData3 can be filled with any information required. For example, a ticket number, or a contract number, or customer number - whatever is required.
The implementation is backwards compatible - i.e. older Apex classes will still function as before (only considering the three parameters serviceName, serviceNumber and callerNumber). Newer Apex classes which use the new parameters can take advantage of the extended functionality.
Direct Call to Agents, Groups, PBX Users and Numbers possible from Agent Full Client
The full client now supports the same functionality as the mini client - it is possible to call agents, groups, PBX users and numbers directly from the agent home screen. This functionality has been available for several releases in the mini client.
IVR Test Number - warning if a country code is configured
If only a country code is configured in the test number for an IVR application, a warning message is now displayed. The user can still choose to save this setting, which results in all callers to the number from that country being handled by the test version of the application.
A new object “CRM+ Query” has been added to the IVR for querying the Brainformatik CRM+ system. Seehttps://wiki.jtel.de/x/LoRhAgfor details on how this object works.
IVR - Comma and apostrophe characters in names caused problems
Using an apostrophe or comma in the name of an IVR object would cause problems. These characters are now converted to similar unicode characters which do not cause problems.
REST Query advanced - encoding of special characters
When using the REST Query advanced in IVR routing application, some logs containing special characters would be incorrectly recorded containing junk characters. This problem has been fixed.
Callback from ACD Event in Supervisor using "Preset" Service Number - no record is created in Statistics.
Upon receiving an Acd Event in Supervisor, while no agent was assigned yet, If the supervisor makes a callback using the "Preset" Service Number option, no record is created in